Harem Pant conversion

There are some things I am willing to splurge on: a well beaded bra and belt, a good silk veil, a beledi dress that is a “one-step costume.” But, harem pants do not fall on that list. Here is how I made a pair for about $6US and some tips so you can, too.

When shopping, start at a thrift store or clearance rack. (“I never met a clearance rack I did not like!”) Then:

1) Look for the for a pair of loose fitting, elastic waist pants in a material that breathes and a color that is USEFUL to your wardrobe. Washable fabrics are even better. I was very lucky and found this pair of black rayon “beach pants” for $4.99US at the local Good---- store.

2) Bring or borrow a rubber band or pony tail tie. You will need it to try the pants on.
3) Check to see that the pants are at least 5 inches longer than you need. I am lucky, because I am short; so, this happens more often than not.
4) Also, be sure that the pants have a full leg to the ankle.
5) When you try the pants on, slip the rubber band / pony tail tie over your foot and use it to gather up the pants leg. This will let you see how the pants will look if you modify them. If you like the look, buy the pants; if not, keep looking.
6) There are two methods of converting these to harem pants:
a. NO SEW: When you need to wear them, slip the rubber band / pony tail tie over your foot and use it to gather up the pants leg. Betcha didn’t think it would be that easy, huh?
b. Some sewing: 1) cut a piece of elastic that is about .5 to 1 inch bigger than the circumference of your ankle. This allows room for overlap and keeps the cuff from being too tight. 2) stitch the ends of the elastic together. 3) turn the pants inside out. 4) slip the elastic band over the cuff of the pants. 5) fold the cuff of the pants over the band and stitch into place.
7) Save the money you spend for something more valuable to YOU!